Kirby Sentria User Manual download pdf (Page 41)

Operating/Maintenance Tips

PART FIVE

Your Kirby

Sentria

system is a highly sophisticated home main-

tenance system. As with most modern appliances, it requires a modest

degree of routine maintenance to keep it operating efficiently. This section

of the Owner’s Manual presents tips on operating and maintaining your

Sentria system. In this section, we will discuss the following:

Changing the Power Nozzle Belt

Adjusting the Brush Roll for Optimum

Performance

Miscellaneous Parts Replacement

Service Tips

Helpful Answers to Questions/Troubleshooting

CHANGING THE POWER NOZZLE BELT

After extended use, the Power Nozzle Belt on your Sentria

system

may become stretched and worn causing the belt to slip. (See page 10 -

Brush Roll Performance Indicator Light.) If this condition exists,

simply replace the old belt with a new one.

NOTE: Use only approved Kirby

belts.

To change the belt, remove the nozzle from the Sentria system.

Then release the belt tension by using the handle on the Belt Lifter



20 to turn it all the way to the right (clockwise) until the green

arrows line up. ➤

Unlock the Rug Plate



26 by unhooking the two latches on the rear

of the nozzle. ➤

Pull on the rear edge of the Rug Plate to remove from the nozzle.

Note the Brush Roll Bristle Height Adjustment setting (1, 2, or 3).

Lift out the belt and Brush Roll. ➤

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 57 58

No comments

Kirby Sentria User Manual Page 41