Kirby Sentria User Manual download pdf (Page 10)

Getting Started

BAG SUPPORT STRAP

Check to make sure the Bag Support Strap



4 is connected to

the Top Adaptor



5 . The Bag Support Strap provides the support

required for proper operation of the Disposable Filter Bag.

If it is not connected, thread the strap through the small hole of the Top

Adaptor. Then place the hole in the strap over the stud on the Top Adaptor.

Finally, insert the adaptor and new filter bag into the Outer Permanent

Bag



1 and close the zipper completely for maximum performance.

NOTE: In order for the Filtration System to perform effectively, use only

Kirby

Micron Magic

HEPA Filtration Bags. If the outside bag is torn or

damaged, please replace immediately. ❏

EMPTYING THE MINI EM-TOR

COLLECTOR

The Mini Em-Tor



6 collector is designed to collect large, heavy

particles which can be emptied by removing the Mini Em-Tor collector.

To remove, grasp the Mini Em-Tor collector in the handhold

provided and rotate it away from the body of the system as far

as it will go, then lift it off.

The top of the bag is released from the handle by pressing the Bag

Release Button



16 . After removing the Mini Em-Tor collector and the

entire Bag Assembly, position the front opening of the Mini Em-Tor

collector over a newspaper and shake it to remove the particles. ➤

To replace the Mini Em-Tor collector, re-attach the entire Bag

Assembly by inserting the Bag Latch Tab



2 at the top of the bag

into the slot under the Bag Release Button



16 .

Finally, line up the raised indicator arrow of the Mini Em-Tor collector

with the indicator arrow on the Air Exhaust Port



19 . Rotate the Mini

Em-Tor collector towards the Sentria

system and lock it in place.

NOTE: The Mini Em-Tor collector must be securely locked in place or

the unit will not operate. ❏

USING THE BELT LIFTER

The Belt Lifter



20 on your Sentria system is used for two purposes:

l) To engage or disengage the Brush Roll. When the Brush Roll is

disengaged, the Sentria system can be used as a straight suction

cleaner(page13),and;

2) To allow removal of the Power Nozzle when converting your Sentria

system for use with various attachments and optional accessories.

To avoid damaging the belt, turn the Sentria system OFF before using

the Belt Lifter. ➤

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 57 58

Comments to this Manuals

No comments

Kirby Sentria User Manual Page 10

Comments to this Manuals