Kirby Sentria User Manual download pdf (Page 25)

PORTABLE SHAMPOOER SET-UP (cont)

Remove the jar from the Portable Sprayer and fill the jar about 3/4

full with Kirby

Carpet Shampoo mixture (Mix according to the

instructions on the bottle.) USE ONLY KIRBY CARPET SHAMPOO

for best results. ➤

Screw the jar tightly on the Portable Sprayer, then attach the

Sprayer to the Attachment Hose.

Make certain your Sentria

system is set up as a Blower Unit. The

Attachment Hose should be connected to the side Air Exhaust Port



19 . ❏

Canister Cleaner & Attachments

IMPORTANT:

The Portable Shampooer is not recommended for use on upholstery or fabrics

such as silk, brocade and velvet. If in doubt, try a test patch. Let the test patch

dry and then check it before you shampoo further.

USING THE PORTABLE SHAMPOOER

Before shampooing, vacuum surface thoroughly.

To make suds, turn the Sentria

system ON and pull the trigger

of the Portable Sprayer. A stream of suds will come out of the cap.

The suds can be sprayed directly onto the surface being cleaned or

on a plain paper bag or in a bowl and then applied to the surface

being cleaned. ➤

Adjust the Portable Sprayer for proper suds volume by turning the

Spray Adjustment Control located on the trigger. ➤

Work suds into the surface with a soft clean, white brush or sponge

until they disappear. Allow the surface to dry completely.

Then vacuum with the appropriate cleaning tool. This will remove the

dry residue which contains grime and loosened dirt. ❏

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 57 58

No comments

Kirby Sentria User Manual Page 25