Kirby Sentria User Manual download pdf (Page 18)

CAUTION:

In normal operation, friction between the belt and the metal motor

shaft may cause the metal motor shaft to become hot to the touch.

CAUTION:

Keep motor shaft free from lint, hair, and debris build-up.

Lock the Attachment Hose Connector in place by turning the

Accessory Lock



22 all the way to the right (clockwise). (Accessory

Lock will clamp the Attachment Hose to the unit.) Then lower the

Headlight Hood.

With the Attachment Hose in place, the unit will automatically adjust to

high speed for hose operation.

NOTE: If the Sentria system will not run when the Power Switch is

ON, see page 44. ❏

At the connector end of the Attachment Hose, you will notice two

hooks. Place the hooks over the ends of the Attaching Bar



24 , then

push the opening of the hose up against the Sentria

system. ➤

Canister Cleaner & Attachments

EXTENSION TUBES

One or two Extension Tubes can be attached to the end of the hose to

extend your reach and efficiently use various attachments. ❏

INSTALLING ATTACHMENTS ON THE

ATTACHMENT HOSE

To attach tools to the hose, push lightly while twisting the smaller end

of the hose into the tool. ❏

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 57 58

No comments

Kirby Sentria User Manual Page 18