Kirby Sentria User Manual download pdf (Page 28)

CARPET SHAMPOO SYSTEM SET-UP (cont)

Taking care to avoid spilling liquid on the Sentria

system or

the floor, place the opening in the bottom front of the Shampoo

Tank over the Air Exhaust Port



19 on the unit. Angle the Shampoo

Tank outward from the unit until the arrows line up. Next, slide the

Shampoo Tank down over the locking pins on the Air Exhaust Port.

Rotate the Shampoo Tank toward the unit (clockwise) to lock it

in place. ➤

Push the round elbow of the small flexible hose into the hole in the

tray until it snaps into place. Firmly insert the other end over the

fitting at the bottom front of the Shampoo Tank. ❏

USING THE CARPET SHAMPOO SYSTEM

To set the nozzle to the proper height, step on the Toe-Touch

Control Upper Pedal



8 as often as necessary to lower the nozzle

to its lowest position. ➤

NOTE: Forcing the brushroll into the surface of the carpet decreases its

ability to thoroughly clean the carpet and could damage the belt

and brushroll.

Turn the Suds Control Valve all the way to the right (clockwise)

to the ON position. Turn the Sentria system ON and engage

Tech Drive

power assist (see page 7 for details). Suds flow will

begin immediately.

Turning the valve all the way to the left (counter-clockwise) to the OFF

position will stop the flow of suds completely.

Stopping the flow of suds allows you to thoroughly brush all the suds

into the carpet before applying more suds. This also lets you spot scrub

badly soiled areas. ➤

Optional Accessories

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 57 58

No comments

Kirby Sentria User Manual Page 28